Skip links

Cincom L20

Brand: CINCOM

The best-selling product L20 adopts modular design and realizes serialization

The L20 adopts a modular design. The product lineup includes a total of 4 models, ranging from a 5-axis machine with an excellent cost-effectiveness to a high-end machine equipped with a Y-axis of the tool holder opposite to the B-axis.

– Through the introduction of modular design, the best specifications of a single unit are realized. It can respond flexibly from simple processing to complex processing-
the horizontal tool layout that is one of the characteristics of the L series, and the rich and diverse tool configurations broaden the processing range
-the B-axis tool equipped with the ATC (automatic tool change) device through the option On the gang knife type knife holder. Needless to say, the processing of complex parts represented by medical parts can also be used for more types of processing (L20XII ATC) through a wealth of tool changes.

Product specifications

L20VIII
Maximum machining diameter
ø20mm
Maximum processing length [GB machine]
200mm/1 time clamping
Maximum processing length [GBL machine]
Workpiece diameter×2.5mm/1
Maximum drilling diameter at the front
ø10mm
Maximum tapping diameter at the front (tapping, die)
M8
Spindle through hole diameter
ø26mm
Spindle speed
Max.10,000min -1
Maximum drilling diameter of gang rotary tool
ø8mm
Maximum tapping diameter of gang rotary tool
M6
Rotating speed of gang knife
Max.6,000min -1
The maximum drilling diameter of the rotating tool of the opposed tool station Note 1
-
The maximum tapping diameter of the rotating tool of the opposing tool station Note 1
-
Rotation speed of the rotating tool of the opposing tool post Note 1
-
Maximum drilling diameter of the rotary tool on the back tool station Note 2
ø5mm (OP)
Maximum tapping diameter of the rotary tool on the back tool table Note 2
M4 (OP)
Rotation speed of the rotary tool of the back tool post Note 2
Max.7,500min -1 (OP)
Maximum clamping diameter of the back spindle
ø20mm
Maximum extension of the back spindle workpiece
30mm
Maximum drilling diameter for back processing
ø8mm
Maximum tapping diameter of back shaft
M6
Back spindle rotation speed
Max.8,000min -1
Number of tools installed
Max.37
Tool size [turning tool]
□12mm (□13mm, □16mm)
Tool size [tool mounting clamp]
ø25mm (GDS107,210) ø19.05mm
Rapid feed rate [All axes (except Y2 axis)]
32m/min
Rapid feed rate [Y2 axis]
-
Motor [for spindle drive]
2.2/3.7kW
Motor【Spindle Drive of Gang Tool】
1.0kW
Motor [For driving the rotary tool of the back tool post Note 2 ]
0.75kW (OP)
Motor [for driving the rotating tool of the opposing tool post Note 1 ]
-
Motor [for back spindle drive]
0.75/1.5kW
Motor [for cutting oil]
0.4kW
input power
7.3kVA
Center height
1,050mm
weight
2,350kg


L20IX
Maximum machining diameter
ø20mm
Maximum processing length [GB machine]
200mm/1 time clamping
Maximum processing length [GBL machine]
Workpiece diameter×2.5mm/1
Maximum drilling diameter at the front
ø10mm
Maximum tapping diameter at the front (tapping, die)
M8
Spindle through hole diameter
ø26mm
Spindle speed
Max.10,000min -1
Maximum drilling diameter of gang rotary tool
ø8mm
Maximum tapping diameter of gang rotary tool
M6
Rotating speed of gang knife
Max.6,000min -1
The maximum drilling diameter of the rotating tool of the opposed tool station Note 1
-
The maximum tapping diameter of the rotating tool of the opposing tool station Note 1
-
Rotation speed of the rotating tool of the opposing tool post Note 1
-
Maximum drilling diameter of the rotary tool on the back tool station Note 2
ø5mm (OP)
Maximum tapping diameter of the rotary tool on the back tool table Note 2
M4 (OP)
Rotation speed of the rotary tool of the back tool post Note 2
Max.7,500min -1 (OP)
Maximum clamping diameter of the back spindle
ø20mm
Maximum extension of the back spindle workpiece
30mm
Maximum drilling diameter for back processing
ø8mm
Maximum tapping diameter of back shaft
M6
Back spindle rotation speed
Max.8,000min -1
Number of tools installed
Max.33
Tool size [turning tool]
□12mm (□13mm, □16mm)
Tool size [tool mounting clamp]
ø25mm (GDS107,210) ø19.05mm
Rapid feed rate [All axes (except Y2 axis)]
32m/min
Rapid feed rate [Y2 axis]
8m/min
Motor [for spindle drive]
2.2/3.7kW
Motor【Spindle Drive of Gang Tool】
1.0kW
Motor [For driving the rotary tool of the back tool post Note 2 ]
0.75kW (OP)
Motor [for driving the rotating tool of the opposing tool post Note 1 ]
-
Motor [for back spindle drive]
0.75/1.5kW
Motor [for cutting oil]
0.4kW
input power
7.3kVA
Center height
1,050mm
weight
2,350kg


L20X
Maximum machining diameter
ø20mm
Maximum processing length [GB machine]
200mm/1 time clamping
Maximum processing length [GBL machine]
Workpiece diameter×2.5mm/1
Maximum drilling diameter at the front
ø10mm
Maximum tapping diameter at the front (tapping, die)
M8
Spindle through hole diameter
ø26mm
Spindle speed
Max.10,000min -1
Maximum drilling diameter of gang rotary tool
ø8mm
Maximum tapping diameter of gang rotary tool
M6
Rotating speed of gang knife
Max.6,000min -1
The maximum drilling diameter of the rotating tool of the opposed tool station Note 1
ø5mm (OP)
The maximum tapping diameter of the rotating tool of the opposing tool station Note 1
M4 (OP)
Rotation speed of the rotating tool of the opposing tool post Note 1
Max.7,500min -1 (OP)
Maximum drilling diameter of the rotary tool on the back tool station Note 2
ø5mm
Maximum tapping diameter of the rotary tool on the back tool table Note 2
M4
Rotation speed of the rotary tool of the back tool post Note 2
Max.7,500min -1
Maximum clamping diameter of the back spindle
ø20mm
Maximum extension of the back spindle workpiece
30mm
Maximum drilling diameter for back processing
ø8mm
Maximum tapping diameter of back shaft
M6
Back spindle rotation speed
Max.8,000min -1
Number of tools installed
Max.44
Tool size [turning tool]
□12mm (□13mm, □16mm)
Tool size [tool mounting clamp]
ø25mm (GDS107,210) ø19.05mm
Rapid feed rate [All axes (except Y2 axis)]
32m/min
Rapid feed rate [Y2 axis]
-
Motor [for spindle drive]
2.2/3.7kW
Motor【Spindle Drive of Gang Tool】
1.0kW
Motor [For driving the rotary tool of the back tool post Note 2 ]
0.75kW
Motor [for driving the rotating tool of the opposing tool post Note 1 ]
0.75kW (OP)
Motor [for back spindle drive]
0.75/1.5kW
Motor [for cutting oil]
0.4kW
input power
7.3kVA
Center height
1,050mm
weight
2,400kg


L20XII
Maximum machining diameter
ø20mm
Maximum processing length [GB machine]
200mm/1 time clamping
Maximum processing length [GBL machine]
Workpiece diameter×2.5mm/1
Maximum drilling diameter at the front
ø10mm
Maximum tapping diameter at the front (tapping, die)
M8
Spindle through hole diameter
ø26mm
Spindle speed
Max.10,000min -1
Maximum drilling diameter of gang rotary tool
ø8mm
Maximum tapping diameter of gang rotary tool
M6
Rotating speed of gang knife
Max.6,000min -1
The maximum drilling diameter of the rotating tool of the opposed tool station Note 1
ø5mm (OP)
The maximum tapping diameter of the rotating tool of the opposing tool station Note 1
M4 (OP)
Rotation speed of the rotating tool of the opposing tool post Note 1
Max.7,500min -1 (OP)
Maximum drilling diameter of the rotary tool on the back tool station Note 2
ø5mm
Maximum tapping diameter of the rotary tool on the back tool table Note 2
M4
Rotation speed of the rotary tool of the back tool post Note 2
Max.7,500min -1
Maximum clamping diameter of the back spindle
ø20mm
Maximum extension of the back spindle workpiece
30mm
Maximum drilling diameter for back processing
ø8mm
Maximum tapping diameter of back shaft
M6
Back spindle rotation speed
Max.8,000min -1
Number of tools installed
Max.40
Tool size [turning tool]
□12mm (□13mm, □16mm)
Tool size [tool mounting clamp]
ø25mm (GDS107,210) ø19.05mm
Rapid feed rate [All axes (except Y2 axis)]
32m/min
Rapid feed rate [Y2 axis]
8m/min
Motor [for spindle drive]
2.2/3.7kW
Motor【Spindle Drive of Gang Tool】
1.0kW
Motor [For driving the rotary tool of the back tool post Note 2 ]
0.75kW
Motor [for driving the rotating tool of the opposing tool post Note 1 ]
0.75kW (OP)
Motor [for back spindle drive]
0.75/1.5kW
Motor [for cutting oil]
0.4kW
input power
7.3kVA
Center height
1,050mm
weight
2,400kg

Note 1: For the relation of opposed rotating tools, there is no setting for VIII and IX type, and the setting is optional for X and XII type.

Note 2: The relation of the rotating tool on the back, VIII and IX type can be selected and set, X and XII type are standard settings.



L20XII ATC
Maximum speed of ATC tool
12,000min -1
Motor power
2.2kW
Tool holder form
JBS-15T
Number of B-axis tools
13 pieces
Total installed number of main machine tools
Max.34
Tool change time (chip to chip)
4.0 sec
Tool outer diameter
ø30mm
Maximum tool holding diameter
ø10mm (ER16)