FANUC -α-D14MiB / α-D21MiB
Brands: FANUC
FANUC ROBODRILL α-iD series is a small machining center with spindle model No. 30. In addition to drilling and tapping, milling and boring are also possible. Equipped with ultra-high-resolution pulse encoder, interpolation and feedback in nanometers, high-speed, high-precision, high-efficiency processing, and extremely smooth processing surface.
At the same time, a single-axis turntable equipped with a synchronous built-in servo motor DDR or DDR-T system is added, which greatly shortens the indexing time and enables high-speed, high-precision simultaneous 4-axis multi-face machining based on direct drive without backlash
Specication(Standard)
Item | robodrill α-D14MiB / robodrill α-D21MiB | |
---|---|---|
Capacty | X-axis-travel(longitudinal movement of table) | 500mm |
Y-axis-travel(cross movement of saddle) | 400mm | |
Z-axis-travel(vertical movement of spindle head) | 330mm | |
Distance from table surface to spindle gage plane | 150-480mm(when no high column is specified) | |
Table | Working space(X-axis x Y-axis) | 650x400mm |
Capacity of workpiece mass | 300kg(uniform load) | |
working surface configuration | 3 x T-slots sizw 14mm pitch 125mm | |
Spindle | Speed range | 100-10,000min-1 |
Spindle gage(call number) | 7/24taper No.30(with air blow) | |
Rapid traverse rate | Rapid traverse rate48m/min(X,Y,Z) | |
Feedrate | 1-30,000mm/min | |
Tool change system | Tool storage capacity | Maximum tool diameter |
Type of tooling | JIS B 6339-1998 BT30,MAS 403-1982 P30T-1(45度) | |
Tool storage capacity | 21 tools:α-D21SiB/D21MiB/D21LiB
14 tools:α-D14SiB/D14MiB/D14LiB |
|
Maximum tool diameter | 80mm | |
Maximum tool length | 250mm (changed by specifications) | |
method of tool selection | Random short path | |
Maximum tool mass | 2kg/tool(total mass 23kg)/3kg/tool(total mass 33kg):α-D21SiB/D21MiB/D21LiB
2kg/tool(total mass 15kg)/3kg/tool(total mass 22kg):α-D14SiB/D14MiB/D14LiB |
|
Tool changing time(Cut to Cut) |
1.4s:α-D21SiB/D21MiB/D21LiB(when 2kg/tool is specified)
1.6s:α-D14SiB/D14MiB/D14LiB(when 2kg/tool is specified) |
|
Motors | Spindle drive motor | 11.0kW(1minute rating)/3.7kW(continuous rating)(changed by specifications) |
Accuracy | Bidrectional accuracy of positioning of an axis(ISO230-2:1988) | 0.006-0.020mm |
Bidrectional accuracy of positioning of an axis(ISO230-2:1988) | less than 0.004mm | |
Sound pressure level | Less than 70dB | |
Control unit(Simultaneously controlled axes) | FANUC Series 31i-B(Max. 4 axes) | Installations(note) Please make sure to comply with installation conditions specified by FANUC when installing ROBODRILL |
Power source | Power supply | 200V.a.c to 220V.a.c, -15% to +10%, 3-phase, 50Hz±1 Hz or 60Hz±1 Hz 10kVA |
Compressed air supply | 0.35~0.55MPα (0.5MPα is recommend)(gage pressure),0.15m3/min(at atmospheric pressure) | |
Machine size | Machine height | 2,236±10mm(when no high coloumn is specified) |
Floor space | 1,615 X 2,040mm | |
Mass of machine | Approx.2,000KG |
robodrill α-D14MiB / robodrill α-D21MiB
- X-axis-travel(longitudinal movement of table)
- 500mm
- Y-axis-travel(cross movement of saddle)
- 400mm
- Z-axis-travel(vertical movement of spindle head)
- 330mm
- Distance from table surface to spindle gage plane
- 150-480mm(when no high column is specified)
- Working space(X-axis x Y-axis)
- 650x400mm
- Capacity of workpiece mass
- 300kg(uniform load)
- working surface configuration
- 3 x T-slots sizw 14mm pitch 125mm
- Speed range
- 100-10,000min-1 /
240-24000min-1(option)
- Spindle gage(call number)
- 7/24taper No.30(with air blow)
- Rapid traverse rate
- 48m/min(X,Y,Z)
- Feedrate
- 1-30,000mm/min
- Tool change system
- Turrent type
- Type of tooling
- JIS B 6339-1998 BT30,MAS 403-1982 P30T-1(45)
- Tool storage capacity
- 21 tools:α-D21SiB/D21MiB/D21LiB
14 tools:α-D14SiB/D14MiB/D14LiB
- Maximum tool diameter
- 80mm
- Maximum tool length
- 250mm (changed by specifications)
- method of tool selection
- Random short path
- Maximum tool mass
-
2kg/tool(total mass 23kg)/3kg/tool(total mass 33kg):α-D21SiB/D21MiB/D21LiB
2kg/tool(total mass 15kg)/3kg/tool(total mass 22kg):α-D14SiB/D14MiB/D14LiB
- Tool changing time(Cut to Cut)
-
1.4s:α-D21SiB/D21MiB/D21LiB
(when 2kg/tool is specified)
1.6秒:α-D14SiB/D14MiB/D14LiB(when 2kg/tool is specified)
- Spindle drive motor
- 11.0kW(1minute rating)/3.7kW(continuous rating)(changed by specifications)
- Bidrectional accuracy of positioning of an axis(ISO230-2:1988)
- 0.006-0.020mm
- Bidrectional repeatability of positioning of an axis(ISO230-2:1987,2006)
- less than 0.004mm
- Sound pressure level
- Less than 70dB
- Control unit
- FANUC Series 31i-B / Max. 4 axes
- Installations(note) Please make sure to comply with installation conditions specified by FANUC when installing ROBODRILL
- Power source
- 200V.a.c to 220V.a.c, -15% to +10%, 3-phase, 50Hz±1 Hz or 60Hz±1 Hz 10kVA
- Compressed air supply
- 0.35~0.55MPα (0.5MPα is recommend)(gage pressure),0.15m3/min(at atmospheric pressure)
- Machine height
- 2,236±10mm(when no high coloumn is specified)
- Floor space
- 1,615 X 2,040mm
- Mass of machine
- Approx.2,000KG